mhorn Posted June 17, 2009 Share Posted June 17, 2009 I'm drafting in a 12 team league this season that uses IDP spots as well as an IDP flex. We don't draft until September so our draft order hasn't been set yet. Here's our roster requirements: 1QB 2RB 3WR 1RB/WR flex 1TE 1K 1DL 1LB 1DB 1IDP flex 8 Bench Spots My thought was to draft 2QB's, 6RB's, 5WR's, 1TE, 1K, 2DL, 2LB, 1DB. Does this look like a reasonable goal for drafting when IDP's are involved? Also what round should I start considering drafting IDP positions? My league's scoring system is: Passing Yards 0.04 per yard Passing Touchdowns 6 Interceptions -2 Rushing Yards 0.1 per yard Rushing Touchdowns 6 Receptions 0.5 per reception Reception Yards 0.1 per yard Reception Touchdowns 6 Return Yards 0.04 per yard Return Touchdowns 6 2-Point Conversions 2 Fumbles Lost -2 Off Fumble Return TD 6 Tackle Solo 1.5 Tackle Assist 0.5 Sack 3 Interception 3 Fumble Force 2 Fumble Recovery 2 Defensive Touchdown 6 Safety 4 Pass Defended 1 Block Kick 4 Quote Link to comment Share on other sites More sharing options...
darin3 Posted June 18, 2009 Share Posted June 18, 2009 I'd probably take 3 LBs and just one DL. You're more than likely going to start a LB at the IDP flex. Actually, I might draft 5 RBs so there's room for a backup DB or DL. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.